Renovation Gauge

Permits

Houses versus apartments in the permit count

Desk note. Data through October 2026.

Of the 1,431,616 housing units authorized in 2025, 911,903 were single-family, 55,741 were in buildings of two to four units and 463,972 were in buildings of five or more. That is a single-family share of 63.7%.

0%20%40%60%80%100%2001200320052007200920112013201520172019202120232025
Single-family share of housing units authorized, United States, annual. Source: Census Bureau Building Permits Survey.

The share has two regimes

In 2005 it was 78.0%. Through the crash it stayed high, since apartment building collapsed along with everything else. The break came afterward: by 2015 the share was 58.9%, and it has moved between roughly 58 and 66 percent since. The 2022 low of 58.0% came as apartment permits hit 651,302 units while single-family fell.

The monthly national series puts the single-family share at 59.6% in October 2026.

Small multifamily barely exists

Two-to-four unit buildings accounted for 3.9% of units in 2025. In 2005 the figure was 3.9%. Duplexes and fourplexes are a rounding item in American homebuilding.

Why a renovation reader should care

Houses and apartment blocks draw on different labor. Single-family construction uses the residential subcontractors who also do remodeling: framers, residential roofers, residential electricians and plumbers. Large multifamily buildings are closer to commercial work in their crews and materials. A year in which the unit total holds up because apartments are strong can still be a slack year for the residential trades, and the reverse.

The states differ far more than the national average suggests.

Highest single-family share of units, 2025
StateUnits 2025Single-family sharevs 2024
West Virginia3,96291%-5.5%
Mississippi8,40587%+6.6%
South Carolina45,86287%-2.6%
Delaware6,46884%-9.4%
New Mexico7,74781%+2.3%
Alabama19,06181%-8.0%
Lowest single-family share of units, 2025
StateUnits 2025Single-family sharevs 2024
District of Columbia1,59111%-8.4%
Connecticut7,27329%+22.7%
New York38,66730%-16.9%
Massachusetts12,47740%-13.0%
Rhode Island1,73842%-1.1%
New Jersey27,66146%-20.8%

In the states at the bottom of that list the total permit count says little about demand for house-scale trades. Use the one-unit column on each state page.

Keep reading

Sources

Files retrieved November 2026. The agency files are the authority; where a figure here differs from theirs, theirs is right.